How to Reset Samsung ML-1660 1665 1666 Printer Firmware
How to Reset Samsung ML-1660 1665 1666 Printer Firmware
If you have a Samsung ML-1660 1665 1666 printer that is not working properly, you may need to reset its firmware. Firmware is the software that controls the printer's functions and settings. Sometimes, the firmware may get corrupted or outdated, causing errors or malfunctions. Resetting the firmware can fix these issues and restore your printer to its original state.
reset ML-1660 1665 1666 v1.01.00.34f (generator 1660 v34).zip
However, resetting the firmware is not a simple task. You will need a special software tool called reset ML-1660 1665 1666 v1.01.00.34f (generator 1660 v34).zip, which can be downloaded from various online sources[^1^] [^2^] [^3^]. This tool can generate a new firmware file for your printer based on its serial number and model. You will also need a USB cable to connect your printer to your computer.
Before you proceed, make sure you have backed up any important data on your printer, such as settings, documents, or contacts. Resetting the firmware will erase all the data on your printer and restore it to factory defaults. You will also need to reinstall any drivers or software that came with your printer after the reset.
Here are the steps to reset your Samsung ML-1660 1665 1666 printer firmware:
Download and extract the reset ML-1660 1665 1666 v1.01.00.34f (generator 1660 v34).zip file to a folder on your computer.
Turn off your printer and disconnect it from the power source.
Press and hold the power button on your printer for about 10 seconds.
While holding the power button, connect your printer to your computer using a USB cable.
Release the power button when you see a green LED light on your printer.
Open the folder where you extracted the reset tool and run the ML-1660_V1.01.00.34.exe file.
Select your printer model from the drop-down menu and enter its serial number in the text box.
Click on Generate to create a new firmware file for your printer.
Click on Browse and select the folder where you want to save the new firmware file.
Click on Save and wait for the file to be created.
Click on Update to start the firmware update process.
Wait for the update to finish and do not disconnect or turn off your printer or computer during this time.
When the update is done, you will see a message saying Firmware update success!.
Click on OK and close the reset tool.
Disconnect your printer from your computer and reconnect it to the power source.
Turn on your printer and wait for it to initialize.
Your printer firmware has been reset successfully!
Congratulations! You have just learned how to reset your Samsung ML-1660 1665 1666 printer firmware using the reset ML-1660 1665 1666 v1.01.00.34f (generator 1660 v34).zip tool. You can now enjoy using your printer without any errors or problems. If you have any questions or feedback, please leave a comment below or contact us at support@printerfix.com. Thank you for reading! e0e6b7cb5c